SQLAB and Magura Join Forces
Every hand is different and MAGURA has entered into a collaborative agreement with the ergonomics specialist SQlab to achieve the best possible ergonomic and individualised adjustment of its MT brakes. The result is an Ergonomics Guide that determines the best possible brake setting in three steps.
Top athletes like Loic Bruni and Danny MacAskill don’t compromise when it comes to brake adjustment. They know the preferred lever blade position and brake setting that will keep them permanently competitive and give them no problems on the road.
MAGURA has teamed up with the ergonomics specialist SQlab to ensure that every biker can now adjust his brake to his needs in the best way possible. The result is an Ergonomics Guide for the best possible adjustment of the brake master and lever blade.
“SQlab has been striving for years to make the interfaces between riders and their bicycles as efcient, comfortable and ergonomic as possible. Our saddles have already proved to be very successful, so now we’re focusing on the point of contact of the hands. The correct lever blade adjustment and our collaboration with MAGURA is the next important step towards more performance and a trouble-free cockpit.”
– Max Holz, SQlab Performance Manager.
HERE’S HOW TO ADJUST YOUR BRAKE TO BEST MEET YOUR REQUIREMENTS:
Positioning the brake master
Hint: To achieve a really sensitive modulation, MAGURA recommend braking with the third finger phalanx.
A correct hand posture on the brake master avoids overstretching the wrist. The brake can also be operated without difculty, because you don’t have to change the position of your hand or release the master.
A tip from the pros: Make a note of the centimetres from the end of the handlebar to the brake master!
Positioning the lever blade angle
To determine the lever blade angle, you must use your own saddle to bar drop (the difference between saddle height and handlebar height). It generally helps to adjust the lever blade until it describes the extended line of the forearm.
The nerves that run through the carpal tunnel affect the thumb, index and middle fingers. A too steep or too at lever blade angle will lead to a kink in the wrist and a narrowing of the carpal tunnel. This in turn leads to numbness and tingling in the thumb, index finger and middle finger.
Reference values for handlebar height & angle of inclination:
> 10 cm handlebar overheight: 20 – 25° 0 – 10 cm handlebar overheight: 25 – 30° 0 – 10 cm saddle overheight: 30 – 35° < 10 cm saddle overheight: 35 – 45°
Positioning the lever blade
MAGURA recommends that you re-check the 1st step again after the 3rd step has been completed!
The settings relate to a general basic position. Change the one adjustment individually where necessary. Important: Make sure that you can grip the lever blade in any situation.
The Ergonomics Guide by MAGURA offers you a simple and effective way to prevent discomfort and increase brake performance.
THERE ARE SO MANY WAYS TO GET MOUNTAIN BIKE ACTION
Mountain Bike Action is a monthly magazine devoted to all things mountain biking (yes, that’s 12 times a year because we never take a month off of mountain biking). It has been around since 1986 and we’re still having fun. Start a subscription by clicking here or calling (800) 767-0345.
Contact us via email at firstname.lastname@example.org